SC16C654BIB64,151 by NXP Semiconductors | Vyrian | Semiconductor & Electronic Component Distributor

Image shown is a representation only.

Manufacturer	NXP Semiconductors
Manufacturer's Part Number	SC16C654BIB64,151
Description	SERIAL IO/COMMUNICATION CONTROLLER, SERIAL; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: LFQFP; Package Shape: SQUARE;
Datasheet	SC16C654BIB64,151 Datasheet

NAME	DESCRIPTION
Minimum Supply Voltage:	2.97 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	3 V
Maximum Seated Height:	1.6 mm
Surface Mount:	YES
Terminal Finish:	TIN
No. of Terminals:	64
No. of Serial I/Os:	4
Terminal Position:	QUAD
Package Style (Meter):	FLATPACK, LOW PROFILE, FINE PITCH
Address Bus Width:	5
Maximum Data Transfer Rate:	.625 MBps
Technology:	CMOS
JESD-30 Code:	S-PQFP-G64
Maximum Clock Frequency:	80 MHz
Package Shape:	SQUARE
Terminal Form:	GULL WING
Maximum Operating Temperature:	85 Cel
Package Code:	LFQFP
Width:	10 mm
Moisture Sensitivity Level (MSL):	1
Peripheral IC Type:	SERIAL IO/COMMUNICATION CONTROLLER, SERIAL
Maximum Supply Voltage:	3.63 V
Low Power Mode:	YES
Boundary Scan:	NO
External Data Bus Width:	8
Communication Protocol:	ASYNC, BIT
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
Qualification:	Not Qualified
Length:	10 mm
Additional Features:	ALSO OPERATES AT 2.5V OR 5V SUPPLY
Peak Reflow Temperature (C):	260
Terminal Pitch:	.5 mm
Temperature Grade:	INDUSTRIAL

Popular Products

FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;

BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.

Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;

SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;