Interrupt Controllers

Reset All

Part	Manufacturer	Peripheral IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	Screening Level	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage	Maximum Operating Temperature	No. of External Interrupts	Minimum Operating Temperature	Terminal Finish	Terminal Position	Maximum Seated Height	Width	External Data Bus Width	Maximum Clock Frequency	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Technology	Maximum Supply Current	Nominal Supply Voltage	Sub-Category	Bus Compatibility	Terminal Pitch	JESD-30 Code	Moisture Sensitivity Level (MSL)	Qualification	JESD-609 Code
NCS37010MNTWG	Onsemi	INTERRUPT CONTROLLER	INDUSTRIAL	NO LEAD		HVQCCN	SQUARE	UNSPECIFIED	YES	12 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		6 V	85 Cel	5	-40 Cel	NICKEL GOLD PALLADIUM	QUAD	1 mm	3 mm			30	260	3 mm	CMOS					.5 mm	S-XQCC-N	3
IS82C59AZX96	Renesas Electronics	INTERRUPT CONTROLLER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.5 V			CHIP CARRIER		4.5 V	85 Cel	8	-40 Cel	MATTE TIN	QUAD	4.57 mm	11.505 mm	8		30	245	11.505 mm	CMOS		5 V		80C86; 80C88; 80C286; 8080; 8085; 8086; 8088; 80286; NSC800	1.27 mm	S-PQCC-J28	3	Not Qualified	e3
NCS37010DBG	Onsemi	INTERRUPT CONTROLLER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	12 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	6 V	85 Cel		-40 Cel	NICKEL GOLD PALLADIUM	DUAL	1.2 mm	4.4 mm					6.5 mm	CMOS					.65 mm	R-PDSO-G20	3
NCS37010DBRG	Onsemi	INTERRUPT CONTROLLER																	NICKEL PALLADIUM GOLD						30	260		CMOS							3		e4
NCS37010MNG	Onsemi	INTERRUPT CONTROLLER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	12 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	6 V	85 Cel		-40 Cel	NICKEL GOLD PALLADIUM	QUAD	1 mm	3 mm					3 mm	CMOS					.5 mm	S-PQCC-N16	3
NCS37010MNRG	Onsemi	INTERRUPT CONTROLLER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	12 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	6 V	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	QUAD	1 mm	3 mm	0				3 mm	CMOS					.5 mm	S-XQCC-N16	3		e4
NCS37014MNTWG	Onsemi	INTERRUPT CONTROLLER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	13 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20		85 Cel		-40 Cel	NICKEL GOLD PALLADIUM	QUAD	1 mm	3 mm	0		30	260	3 mm		10 mA	12 V			.5 mm	S-XQCC-N16	3
CS82C59A-12Z96	Renesas Electronics	INTERRUPT CONTROLLER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.5 V			CHIP CARRIER		4.5 V	70 Cel	8	0 Cel	MATTE TIN	QUAD	4.57 mm	11.505 mm	8		30	245	11.505 mm	CMOS		5 V		80C86; 80C88; 80C286; 8080; 8085; 8086; 8088; 80286; NSC800	1.27 mm	S-PQCC-J28	3	Not Qualified	e3
NCS37015MNTWG	Onsemi	INTERRUPT CONTROLLER
NS32202N-10	National Semiconductor	INTERRUPT CONTROLLER	COMMERCIAL	THROUGH-HOLE	40	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			5	IN-LINE	DIP40,.6		70 Cel		0 Cel	Tin/Lead (Sn/Pb)	DUAL								MOS	300 mA	5 V	Interrupt Controllers		2.54 mm	R-PDIP-T40		Not Qualified	e0
CP82C59A	Renesas Electronics	INTERRUPT CONTROLLER	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V		5	IN-LINE	DIP28,.6	4.5 V	70 Cel	8	0 Cel	TIN LEAD	DUAL	6.35 mm	15.24 mm	8				37.4 mm	CMOS	8 mA	5 V	Interrupt Controllers	80C86; 80C88; 80C286; 8080; 8085; 8086; 8088; 80286; NSC800	2.54 mm	R-PDIP-T28		Not Qualified	e0
ID82C59A/+	Intersil	INTERRUPT CONTROLLER	INDUSTRIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	CERAMIC	NO			5	IN-LINE	DIP28,.6		85 Cel		-40 Cel	Tin/Lead (Sn/Pb)	DUAL								CMOS	8 mA	5 V	Interrupt Controllers		2.54 mm	R-XDIP-T28			e0
ID82C59A	Renesas Electronics	INTERRUPT CONTROLLER	INDUSTRIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V		5	IN-LINE	DIP28,.6	4.5 V	85 Cel	8	-40 Cel	TIN LEAD	DUAL	5.92 mm	15.24 mm	8					CMOS	8 mA	5 V	Interrupt Controllers	80C86; 80C88; 80C286; 8080; 8085; 8086; 8088; 80286; NSC800	2.54 mm	R-GDIP-T28		Not Qualified	e0
MR82C59A/B	Intersil	INTERRUPT CONTROLLER	MILITARY	NO LEAD	28	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	38535Q/M;38534H;883B	5	CHIP CARRIER	LCC28,.45SQ	4.5 V	125 Cel	8	-55 Cel	Tin/Lead (Sn/Pb)	QUAD	2.54 mm	11.455 mm	8				11.455 mm	CMOS	8 mA	5 V	Interrupt Controllers	80C86; 80C88; 80C286; 8080; 8085; 8086; 8088; 80286; NSC800	1.27 mm	S-CQCC-N28		Not Qualified	e0
CP82C59A-12	Renesas Electronics	INTERRUPT CONTROLLER	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V		5	IN-LINE	DIP28,.6	4.5 V	70 Cel	8	0 Cel	TIN LEAD	DUAL	6.35 mm	15.24 mm	8				37.4 mm	CMOS	12 mA	5 V	Interrupt Controllers	80C86; 80C88; 80C286; 8080; 8085; 8086; 8088; 80286; NSC800	2.54 mm	R-PDIP-T28		Not Qualified	e0
NS32202D-10	National Semiconductor	INTERRUPT CONTROLLER	COMMERCIAL	THROUGH-HOLE	40	DIP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	NO	5.25 V		5	IN-LINE	DIP40,.6	4.75 V	70 Cel	16	0 Cel	TIN LEAD	DUAL	5.08 mm	15.24 mm	8					CMOS	300 mA	5 V	Interrupt Controllers		2.54 mm	R-CDIP-T40		Not Qualified	e0
CP82C59AZ	Renesas Electronics	INTERRUPT CONTROLLER	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V			IN-LINE		4.5 V	70 Cel	8	0 Cel	MATTE TIN	DUAL	6.35 mm	15.24 mm	8				37.4 mm	CMOS		5 V		80C86; 80C88; 80C286; 8080; 8085; 8086; 8088; 80286; NSC800	2.54 mm	R-PDIP-T28		Not Qualified	e3
M5M82C59AFP-2	Mitsubishi Electric	INTERRUPT CONTROLLER	COMMERCIAL EXTENDED	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V			SMALL OUTLINE		4.5 V	75 Cel	8	-20 Cel		DUAL	2.15 mm	8.4 mm	8				17.5 mm	CMOS		5 V			1.27 mm	R-PDSO-G28		Not Qualified
P8259A-2	Rochester Electronics	INTERRUPT CONTROLLER	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V			IN-LINE		4.5 V	70 Cel	8	0 Cel	TIN LEAD	DUAL	5.08 mm	15.24 mm	8				37.02 mm	NMOS		5 V		8086; 8088; MCS-80; MCS-85	2.54 mm	R-PDIP-T28		Not Qualified	e0
TI32202WJDL2	Texas Instruments	INTERRUPT CONTROLLER	COMMERCIAL	THROUGH-HOLE	40	DIP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	NO	5.25 V		5	IN-LINE	DIP40,.6	4.75 V	70 Cel	16	0 Cel		DUAL	5.08 mm	15.24 mm	8	10 MHz	NOT SPECIFIED	NOT SPECIFIED		NMOS	300 mA	5 V	Interrupt Controllers	32000	2.54 mm	R-CDIP-T40		Not Qualified
SBP9961MJ	Texas Instruments	INTERRUPT CONTROLLER	MILITARY	THROUGH-HOLE	40	DIP	RECTANGULAR	CERAMIC	NO			5	IN-LINE	DIP40,.6		125 Cel		-55 Cel		DUAL								BIPOLAR	145 mA	5 V	Interrupt Controllers		2.54 mm	R-XDIP-T40		Not Qualified
SBP9961CJ	Texas Instruments	INTERRUPT CONTROLLER	COMMERCIAL	THROUGH-HOLE	40	DIP	RECTANGULAR	CERAMIC	NO			5	IN-LINE	DIP40,.6		70 Cel		0 Cel		DUAL								BIPOLAR	145 mA	5 V	Interrupt Controllers		2.54 mm	R-XDIP-T40		Not Qualified
SBP9961EJ	Texas Instruments	INTERRUPT CONTROLLER	INDUSTRIAL	THROUGH-HOLE	40	DIP	RECTANGULAR	CERAMIC	NO			5	IN-LINE	DIP40,.6		85 Cel		-40 Cel		DUAL								BIPOLAR	145 mA	5 V	Interrupt Controllers		2.54 mm	R-XDIP-T40		Not Qualified
NCP37012	Onsemi	INTERRUPT CONTROLLER																										CMOS
NCS37000DARG	Onsemi	INTERRUPT CONTROLLER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	12 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		6 V	85 Cel	8	-40 Cel		DUAL	1.2 mm	4.4 mm			NOT SPECIFIED	NOT SPECIFIED	6.5 mm	CMOS					.65 mm	R-PDSO-G20
NCS37000DBG	Onsemi	INTERRUPT CONTROLLER																										CMOS
NCS37013MNTWG	Onsemi	INTERRUPT CONTROLLER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	14 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	10 V	85 Cel		-40 Cel	NICKEL GOLD PALLADIUM	QUAD	1 mm	3 mm	0		30	260	3 mm			12 V			.5 mm	S-XQCC-N16	3
NCS37012DBG	Onsemi	INTERRUPT CONTROLLER																	Nickel/Gold/Palladium (Ni/Au/Pd)									CMOS							3
NCS37012MNG	Onsemi	INTERRUPT CONTROLLER																	Nickel/Gold/Palladium (Ni/Au/Pd)									CMOS							3
NCS37005DBG	Onsemi	INTERRUPT CONTROLLER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	18 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	6 V	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	1.2 mm	4.4 mm	0		30	260	5 mm	CMOS					.65 mm	R-PDSO-G20	3		e4
NCS37000DAG	Onsemi	INTERRUPT CONTROLLER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	12 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		6 V	85 Cel	8	-40 Cel		DUAL	1.2 mm	4.4 mm			NOT SPECIFIED	NOT SPECIFIED	6.5 mm	CMOS					.65 mm	R-PDSO-G20
NCS37000MNTWG	Onsemi	INTERRUPT CONTROLLER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	12 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		6 V	85 Cel	7	-40 Cel		QUAD	1 mm	3 mm					3 mm	CMOS					.5 mm	S-XQCC-N16
NCS37000MNG	Onsemi	INTERRUPT CONTROLLER	AUTOMOTIVE	NO LEAD	16	QCCN	UNSPECIFIED	UNSPECIFIED	YES	12 V			CHIP CARRIER		6 V	125 Cel		-40 Cel		QUAD					NOT SPECIFIED	NOT SPECIFIED		CMOS						X-XQCC-N16
NCS37012DAG	Onsemi	INTERRUPT CONTROLLER																							NOT SPECIFIED	NOT SPECIFIED		CMOS
NCS37000MNRG	Onsemi	INTERRUPT CONTROLLER	AUTOMOTIVE	NO LEAD	16	QCCN	SQUARE	UNSPECIFIED	YES	12 V			CHIP CARRIER		6 V	125 Cel		-40 Cel	NICKEL PALLADIUM GOLD	QUAD			0					CMOS	1.5 mA					S-XQCC-N16	3		e4
NCS37012DBRG	Onsemi	INTERRUPT CONTROLLER																	Nickel/Gold/Palladium (Ni/Au/Pd)									CMOS							3
NCS37005DBRG	Onsemi	INTERRUPT CONTROLLER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	18 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	6 V	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	1.2 mm	4.4 mm	0		30	260	5 mm	CMOS					.65 mm	R-PDSO-G20	3		e4
NCS37012DARG	Onsemi	INTERRUPT CONTROLLER																							NOT SPECIFIED	NOT SPECIFIED		CMOS
NCS37020DTBR2G	Onsemi	INTERRUPT CONTROLLER	COMMERCIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	13 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25		70 Cel		0 Cel		DUAL	1.2 mm	4.4 mm	0		NOT SPECIFIED	NOT SPECIFIED	5 mm		10 mA	12 V			.65 mm	R-PDSO-G14
NCS37000DBRG	Onsemi	INTERRUPT CONTROLLER																										CMOS
NCS37012MNTWG	Onsemi	INTERRUPT CONTROLLER																	Nickel/Gold/Palladium (Ni/Au/Pd)									CMOS							3
5962-8866601QA	NXP Semiconductors	INTERRUPT CONTROLLER	MILITARY	THROUGH-HOLE	40	DIP	RECTANGULAR	UNSPECIFIED	NO	5.5 V	MIL-STD-883		IN-LINE		4.5 V	125 Cel	8	-55 Cel		DUAL			8					BIPOLAR		5 V				R-XDIP-T40		Not Qualified
5962-8866601QX	NXP Semiconductors	INTERRUPT CONTROLLER	MILITARY	THROUGH-HOLE	40	DIP	RECTANGULAR	UNSPECIFIED	NO	5.5 V	MIL-STD-883		IN-LINE		4.5 V	125 Cel	8	-55 Cel		DUAL			8					BIPOLAR		5 V				R-XDIP-T40		Not Qualified
8X310/BQA	NXP Semiconductors	INTERRUPT CONTROLLER		THROUGH-HOLE	40	DIP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	NO				IN-LINE				3			DUAL			0					CMOS		5 V				R-CDIP-T40		Not Qualified
68155/BQA	NXP Semiconductors	INTERRUPT CONTROLLER	MILITARY	THROUGH-HOLE	40	DIP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	NO	5.5 V			IN-LINE		4.5 V	125 Cel	8	-55 Cel		DUAL			8					BIPOLAR		5 V				R-CDIP-T40		Not Qualified
SAB8259A-2N	Infineon Technologies	INTERRUPT CONTROLLER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES			5	CHIP CARRIER	LDCC28,.5SQ		70 Cel		0 Cel	Tin/Lead (Sn/Pb)	QUAD								MOS	85 mA	5 V	Interrupt Controllers		1.27 mm	S-PQCC-J28		Not Qualified	e0
SAB8259AN	Infineon Technologies	INTERRUPT CONTROLLER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES			5	CHIP CARRIER	LDCC28,.5SQ		70 Cel		0 Cel	Tin/Lead (Sn/Pb)	QUAD								MOS	85 mA	5 V	Interrupt Controllers		1.27 mm	S-PQCC-J28		Not Qualified	e0
SAB8259A-2C	Infineon Technologies	INTERRUPT CONTROLLER	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	CERAMIC	NO			5	IN-LINE	DIP28,.6		70 Cel		0 Cel	Tin/Lead (Sn/Pb)	DUAL								MOS		5 V	Interrupt Controllers		2.54 mm	R-XDIP-T28		Not Qualified	e0

Interrupt controllers are electronic circuits or chips that are used to manage interrupts in a computer system. Interrupts are signals sent to the processor by hardware or software components to request the attention of the processor. Interrupt controllers are responsible for managing and prioritizing these interrupt requests and for dispatching them to the appropriate handler in the system.

Interrupt controllers typically have a number of interrupt inputs and a single interrupt output. When an interrupt request is received, the interrupt controller will prioritize the request based on its priority level and dispatch it to the appropriate handler. Interrupt controllers also typically include interrupt masking and enabling features, which allow the processor to selectively enable or disable certain interrupt requests.

Interrupt controllers are essential components of modern computer systems and are used to manage a wide range of hardware and software interrupt requests. They are commonly used in microcontrollers, embedded systems, and other computer systems where efficient interrupt handling is critical.

There are many different types of interrupt controllers available, each designed for specific applications and systems. Some interrupt controllers are designed for real-time systems, while others are designed for general-purpose computing applications. The choice of interrupt controller depends on the specific requirements of the system and the type of interrupts that need to be managed.