Image shown is a representation only.
| Manufacturer | Texas Instruments |
|---|---|
| Manufacturer's Part Number | PTH12050WAH |
| Description | DC-DC REGULATED POWER SUPPLY MODULE; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: DMA; Package Shape: RECTANGULAR; Surface Mount: NO; |
| Datasheet | PTH12050WAH Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Package Body Material: | UNSPECIFIED |
| Maximum Line Regulation: | .4 % |
| Nominal Output Voltage: | 1.2 V |
| Control Mode: | VOLTAGE-MODE |
| Maximum Time At Peak Reflow Temperature (s): | NOT SPECIFIED |
| Trim or Adjustable Output (V): | YES |
| Protection(s): | OUTPUT OVER CURRENT;THERMAL |
| Width (mm): | 12.57 mm |
| Maximum Output Current: | 6 A |
| Sub-Category: | Power Supply Modules |
| Surface Mount: | NO |
| Terminal Finish: | Matte Tin (Sn) |
| No. of Outputs: | 1 |
| Switcher Config: | BUCK |
| No. of Terminals: | 6 |
| Terminal Position: | DUAL |
| Package Style (Meter): | MICROELECTRONIC ASSEMBLY |
| Maximum Load Regulation: | .4 % |
| Technology: | HYBRID |
| JESD-30 Code: | R-XDMA-P6 |
| Package Shape: | RECTANGULAR |
| Terminal Form: | PIN/PEG |
| Maximum Operating Temperature: | 85 Cel |
| Height: | 8.25 mm |
| Package Code: | DMA |
| Minimum Output Voltage: | 1.2 V |
| Moisture Sensitivity Level (MSL): | 1 |
| Maximum Switching Frequency: | 380 kHz |
| Minimum Input Voltage: | 10.8 V |
| Warm-Up Time: | .00007 Seconds |
| Maximum Input Voltage: | 13.2 V |
| Maximum Output Voltage: | 5.5 V |
| Approvals (V): | UL, CSA, IEC |
| JESD-609 Code: | e3 |
| Minimum Operating Temperature: | -40 Cel |
| No. of Functions: | 1 |
| Qualification: | Not Qualified |
| Nominal Input Voltage: | 12 V |
| Other IC type: | DC-DC REGULATED POWER SUPPLY MODULE |
| Length: | 22.1 mm |
| Main Out Ripple Voltage: | .00884 Vrms |
| Peak Reflow Temperature (C): | NOT SPECIFIED |
| Terminal Pitch: | 3.175 mm |
| Main Output Efficiency: | 84 % |
| Temperature Grade: | INDUSTRIAL |
