T9A-P5D52-12 by TE Connectivity | Vyrian | Semiconductor & Electronic Component Distributor

Image shown is a representation only.

Manufacturer	TE Connectivity
Manufacturer's Part Number	T9A-P5D52-12
Description	POWER/SIGNAL RELAY; Mounting Feature: PANEL MOUNT; Relay Action: MOMENTARY; Relay Function: SPDT; Coil or Input Supply Type: DC; Reference Standard: CSA; UL;
Datasheet	T9A-P5D52-12 Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	20 A
Maximum AC Coil Current:	.083 A
Relay Function:	SPDT
DC Coil Release Voltage:	1.2 V
Maximum AC Contact Voltage:	277 V
Dielectric Strength Between Open Contacts:	1500 Vrms
Contact or Output Supply Type:	AC/DC
Maximum Contact DC Rating (R Load):	30A@28VDC
Relay Type:	POWER/SIGNAL RELAY
Coil or Input Supply Type:	DC
Relay Form:	1 FORM C
Termination Type:	SOLDER/QUICK CONNECT
Operate Time:	15 ms
Electrical Life:	100000 Cycle(s)
DC Coil Operate Voltage:	9 V
Release Time:	15 ms
Maximum Operating Temperature:	85 Cel
Insulation Resistance:	1000000000 ohm
Maximum DC Coil Current:	.083 A
Maximum AC Contact Current:	20 A
End Contact Material:	SILVER CADMIUM OXIDE
Maximum DC Contact Voltage:	28 V
Coil Resistance:	144 ohm
Sealing:	DUST PROOF
Minimum Operating Temperature:	70 Cel
Weight:	33 g
Mounting Feature:	PANEL MOUNT
Relay Action:	MOMENTARY
Body Width:	27.4 inch
Maximum DC Coil Voltage:	12 V
Dielectric Strength Between Coil & Contacts:	2500 Vrms
Physical Dimension:	32.5mm x 27.4mm x 27.9mm
Body Height:	27.9 mm
Body Length/Diameter:	32.5 mm
Reference Standard:	CSA; UL
Maximum Contact AC Rating (R Load):	30A@240VAC
Coil Power (mW):	1000

Popular Products

BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;

KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;

LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.