KUL-11A15S-24 by TE Connectivity | Vyrian | Semiconductor & Electronic Component Distributor

Image shown is a representation only.

Manufacturer	TE Connectivity
Manufacturer's Part Number	KUL-11A15S-24
Description	POWER/SIGNAL RELAY; Mounting Feature: PANEL MOUNT; Relay Action: LATCHED; Relay Function: DPDT; Coil or Input Supply Type: AC; Reference Standard: UL;
Datasheet	KUL-11A15S-24 Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	10 A
Relay Function:	DPDT
Maximum AC Contact Voltage:	240 V
Dielectric Strength Between Open Contacts:	500 Vrms
Contact or Output Supply Type:	AC/DC
Maximum Contact DC Rating (R Load):	10A@28VDC
Relay Type:	POWER/SIGNAL RELAY
Coil or Input Supply Type:	AC
Relay Form:	2 FORM C
Termination Type:	SOLDER/QUICK CONNECT
Operate Time:	25 ms
Electrical Life:	100000 Cycle(s)
Release Time:	25 ms
Maximum Operating Temperature:	70 Cel
Insulation Resistance:	100000000 ohm
Maximum AC Contact Current:	10 A
End Contact Material:	SILVER CADMIUM OXIDE
Maximum AC Coil Voltage:	24 V
Maximum DC Contact Voltage:	28 V
Coil Resistance:	176 ohm
Sealing:	DUST PROOF
Minimum Operating Temperature:	50 Cel
Weight:	96 g
Mounting Feature:	PANEL MOUNT
Relay Action:	LATCHED
Body Width:	35.7 inch
Dielectric Strength Between Coil & Contacts:	1500 Vrms
Physical Dimension:	38.9mm x 35.7mm x 54.8mm
Body Height:	54.8 mm
Additional Features:	COIL OPERATE VOLTAGE(AC): 20.4 V
Body Length/Diameter:	38.9 mm
Reference Standard:	UL
Maximum Contact AC Rating (R Load):	10A@240VAC

Popular Products

FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.

INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.

LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;

KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.