TE Connectivity - K10P-11AT5-24

K10P-11AT5-24 by TE Connectivity

Image shown is a representation only.

Manufacturer	TE Connectivity
Manufacturer's Part Number	K10P-11AT5-24
Description	POWER/SIGNAL RELAY; Mounting Feature: PANEL MOUNT; Relay Action: MOMENTARY; Relay Function: DPDT; Coil or Input Supply Type: AC; Reference Standard: CSA; UL;
Datasheet	K10P-11AT5-24 Datasheet

K10P-11AT5-24 Technical Details

NAME	DESCRIPTION
Nominal Coil Voltage:	24 V
Maximum DC Contact Current:	15 A
Maximum AC Coil Current:	.05 A
Relay Function:	DPDT
Maximum AC Contact Voltage:	120 V
Dielectric Strength Between Open Contacts:	1000 Vrms
Contact or Output Supply Type:	AC
Maximum Contact DC Rating (R Load):	15A@30VDC
Relay Type:	POWER/SIGNAL RELAY
Coil or Input Supply Type:	AC
Relay Form:	2 FORM C
Termination Type:	SOLDER/QUICK CONNECT
AC Coil Release Voltage:	2.4 V
Operate Time:	13 ms
Electrical Life:	10000000 Cycle(s)
Release Time:	6 ms
Maximum Operating Temperature:	70 Cel
Contact Resistance:	100 mohm
Insulation Resistance:	1000000000 ohm
Maximum AC Contact Current:	15 A
End Contact Material:	SILVER CADMIUM OXIDE
Maximum AC Coil Voltage:	24 V
Maximum DC Contact Voltage:	30 V
Coil Resistance:	160 ohm
Sealing:	DUST PROOF
Minimum Operating Temperature:	50 Cel
Weight:	51 g
Mounting Feature:	PANEL MOUNT
Relay Action:	MOMENTARY
Body Width:	21.7 inch
Dielectric Strength Between Coil & Contacts:	1500 Vrms
Physical Dimension:	28.2mm x 21.8mm x 34.9mm
AC Coil Operate Voltage:	20.4 V
Body Height:	42.7 mm
Additional Features:	COIL OPERATE VOLTAGE(AC): 20.4 V
Body Length/Diameter:	27.6 mm
Reference Standard:	CSA; UL
Maximum Contact AC Rating (R Load):	15A@120VAC
Coil Power (mW):	1200

Powered by Partstack

Popular Products

LM107H/883

Linear Technology

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;

BSS123-7-F

Diodes Incorporated

BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.

BSS138

Sipex

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;

SMBJ18CA

General Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

2N2222A

Electronic Transistors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

LM317T

STMicroelectronics

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;

1N4148

Renesas Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

ULN2803A

Onsemi

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;

LM107H/883

Advanced Micro Devices

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;

2N7002,215

Nexperia

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;

Category Top Products