DTM13-12PA-12PB-GR01 by TE Connectivity | Vyrian | Semiconductor & Electronic Component Distributor

Image shown is a representation only.

Manufacturer	TE Connectivity
Manufacturer's Part Number	DTM13-12PA-12PB-GR01
Description	COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body Length: 1.453 inch; Panel Mount: NO; Body Width: 3.976 inch;
Datasheet	DTM13-12PA-12PB-GR01 Datasheet

NAME	DESCRIPTION
Mating Contact Finish:	NOT SPECIFIED
Mains Connector Rating:	7.5A
IEC Conformity:	NO
Panel Mount:	NO
Empty Shell:	YES
MIL Conformity:	NO
No. of Rows Loaded:	2
Termination Type:	SOLDER
Maximum Operating Temperature (Cel):	125
Body Length:	1.453 inch
Contact Gender:	MALE
Connector Type:	COMBINATION LINE CONNECTOR
Contact Material:	NOT SPECIFIED
UL Flammability Code:	94V-0
Mounting Style:	RIGHT ANGLE
Mixed Contacts:	NO
No. of Ports:	1
Contact Style:	RND PIN-SKT
EMI Shielded:	NO
Filter Feature:	NO
Mounting Type:	BOARD
Body Depth:	1.453 inch
Minimum Operating Temperature:	-55 Cel
Total No. of Contacts:	24
Rated Voltage:	250 V
Body Width:	3.976 inch
Terminal Pitch (mm):	4.19
Termination Contact Finish:	NOT APPLICABLE
Rated Current - Signal:	7.5 A
Reference Standard:	UL
Option:	GENERAL PURPOSE
Body or Shell Style:	RECEPTACLE
DIN Conformance:	NO

Popular Products

RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;

Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.

LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.

MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.

GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;

AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;