STMicroelectronics - ECMF02-4CMX8

Murata Manufacturing's NFM18PC104R1C3D is a data line filter with 1000 Mohm insulation resistance, 16V rated voltage, and 100000 uF capacitance. It is a feed through capacitor used in applications requiring filtering of electrical signals.

Murata Manufacturing's BLM15AG700SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1x0.5x0.5mm, it offers a max frequency of 100MHz and DC resistance of 0.15 ohm. Ideal for surface mount applications, this ferrite chip filter has an output impedance of 70 ohm and rated current of 0.6A.

Murata Manufacturing's BLM21PG600SN1D is an 0805 chip bead filter with 2 terminals, operating b/w -55°C to 125°C. With a width of 1.25mm and length of 2mm, it offers a max DC resistance of 0.025 ohm and output impedance of 60 ohm at frequencies ranging from 100 MHz. Ideal for data line filtering applications, this surface mount component has a rated current of 3A and uses ferrite material for effective noise suppression.

Wurth Elektronik 7427512 is a chip bead data line filter with 3 functions. It operates b/w -40 to 125°C, has an output impedance of 580Ω, and rated current of 5A. Used in surface mount applications for filtering frequencies from 25-100MHz in electronic circuits.

SNUF6401MNT1G by Onsemi is a data line filter with 6 functions, AEC-Q100 screening level, and 12 terminals. It operates b/w -40°C to 85°C, has a max DC resistance of 115 ohm, and output impedance of 50 ohm. Widely used in automotive applications for noise filtering in data lines due to its compact dimensions (L3.0XB1.35XH1.0 mm).

Wurth Elektronik 744242220 is a Data Line Filter with 2 functions, rated voltage of 80V, and inductance of 22uH. It operates b/w -40 to 125 °C and has a max DC resistance of 0.23 ohm. Ideal for applications requiring filtering on data lines with UL approval.

EMIF06-USD14F3 by STMicroelectronics is a data line filter with 6 functions and 15 terminals. It operates b/w -30°C to 85°C, with a capacitance of 12uF. This surface mount filter is ideal for applications requiring IEC and UL approvals.

DATA LINE FILTER; Rated Current: 6 A; Terminal Finish: Tin (Sn) over Copper (Cu); No. of Functions: 1; Additional Features: INCRIMP LEAD TYPE; Rated Voltage: 25 V;

DATA LINE FILTER MODULE; Maximum DC Resistance: .025 ohm; Rated Current: 7 A; Height: 12.19 mm; Approvals (V): UL; CSA; VDE; EN; Dimensions: L25.4XB25.4XH12.19 (mm)/L1.0XB1.0XH0.48 (inch);

FERRITE CHIP; Construction: Multi-Layer; Maximum DC Resistance: .6 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .2 A;

Wurth Elektronik 742792731 is a FERRITE CHIP Data Line Filter with 2 terminals. It has a max operating temp of 125°C and min of -55°C. With dimensions of L1.0xB0.5xH0.5 (mm), it's ideal for surface mount applications requiring a rated current of 1.2A and output impedance of 100Ω.

ACM4520-901-2P-T000 by TDK is a Data Line Filter with 2 functions, rated at 50V and 2A. It offers high insulation resistance of 10 Mohm, low DC resistance of 0.06 ohm, and output impedance of 900 ohm. Ideal for applications requiring noise suppression in data lines with operating temperatures from -40 to 85°C.

FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .4 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .4 A;

Wurth Elektronik 742792796 is a FERRITE CHIP data line filter with 2 terminals, rated for 0.2A current. It operates b/w -55 to 125 °C and has a max DC resistance of 1.5 ohm. Ideal for surface mount applications requiring output impedance of 1000 OHM in compact spaces.

ACM1513-551-2PL-TLHF by TDK is a Data Line Filter with 10A rated current, 50V rated voltage, and 550 ohm output impedance. It has 2 functions and operates b/w -40°C to 85°C. Ideal for applications requiring noise filtering in data lines.

TDK's MPZ2012S601AT000 is an 0805 chip bead filter with a ferrite chip construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.1 ohm, and output impedance of 600 OHM. Ideal for data line filtering applications due to its compact size and high rated current of 2 A.

HI1206T161R-10 by Laird Technologies is a chip bead data line filter with 2 terminals, FERRITE CHIP type, and matte tin finish. With dimensions of L3.2XB1.6XH1.1 (mm), it operates b/w -40 to 125 °C and has a max frequency of 1000 MHz. Ideal for applications requiring impedance of 160 OHM and rated current of 6 A in surface mount configurations.

Murata Manufacturing's BLM41PG750SN1L is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. It offers a max DC resistance of 0.025 ohm and output impedance of 75 OHM at frequencies ranging from 100 MHz. Ideal for surface mount applications requiring high-frequency filtering.

FERRITE CHIP; Maximum DC Resistance: .14 ohm; Material: Ferrite; Rated Current: 1.1 A; No. of Functions: 1; Length: 1.6 mm;

Murata's BLM41PG600SN1L is a chip bead data line filter with 2 terminals, rated for 6A current. With dimensions of L4.5XB1.6XH1.6 (mm), it offers a max operating temperature of 125°C and output impedance of 60Ω. Ideal for surface mount applications, this ferrite chip filter operates b/w -55 to 125°C, making it suitable for noise suppression in electronic circuits up to 100MHz frequency range.