JJ-P02D11-S5 by SIIG, Inc

Image shown is a representation only.

Manufacturer SIIG, Inc
Manufacturer's Part Number JJ-P02D11-S5
Description SIIG; Product Line: CyberSerial; Product Type: Serial Adapter; Host Interface: PCI; Form Factor: Plug-in Card; System Requirements: Pentium or equivalent computer with an available 32-/64-bit PCI or PCI-X slot;
NAME DESCRIPTION
Buffer: 32 Byte
Data Transfer Rate: Up to 230kB/s Serial Port
Certifications & Standards:
  • FCC Class B (DoC)
  • CE
Product Name: CyberSerial Dual+DOS 2-Port Serial Adapter
Input Voltage: 3.3 V DC, 5 V DC
UART Type: 16550
Platform Supported: PC
Limited Warranty: Lifetime
Number of Serial Ports (External): 2
Brand Name: SIIG
Form Factor: Plug-in Card
Package Contents:
  • CyberSerial Dual+DOS 2-Port Serial Adapter
  • Driver CD
  • Installation guide
Additional Information:
  • Enhanced bracket design to prevent bending. Connected to PCB with washered screws for a more secure connection
  • Supports PME (Power Management Event). Allows device to request a change in system power state (wake up system)
  • Use SMT (Surface Mount Technology) type electrolytic capacitor. Low ESR (Equivalent Series Resistance) aluminum electrolytic capacitor. Offers much improved noise suppression & achieves higher levels of performance/reliability
  • Use SMT (Surface Mount Technology) type crystal. Offers cleaner design than traditional DIP-type crystal. Provides greatly improved grounding, which reduces EMI emission & improves performance/reliability

4-layer PCB board:

  • Separate layers for data & grounding
  • Greatly reduces signal noise & loss
  • Delivers more reliable high-speed data transfers
Marketing Information:
  • Supports 32-/64-bit, 3.3V/5V PCI and PCI-X slots
  • Two high-speed 16550 UART serial ports (9-pin) support data rate up to 230 Kbps
  • Includes support for DOS, Windows 95/98/98SE/Me/2000/XP/Server 2003, & Linux Kernel 2.4.x or later
  • Will work as standard RS232 port or with 5V or 12V power output for devices that require power (such as handheld scanners, table scanners, POS displays, etc.). Configurable via jumpers with silk-screened settings on PCB
Product Type: Serial Adapter
Host Interface: PCI
System Requirements:
  • Pentium or equivalent computer with an available 32-/64-bit PCI or PCI-X slot
Compatibility:
  • Compatible with PCI-X 64-bit

Supported Operating Systems:

  • DOS
  • Windows 95
  • Windows 98
  • Windows 98SE
  • Windows Me
  • Windows 2000
  • Windows XP
  • Windows Server 2003
  • Linux Kernel 2.4.x or later
Product Line: CyberSerial