RTL8111F-CG by Realtek Semiconductor | Vyrian | Semiconductor & Electronic Component Distributor

Image shown is a representation only.

Manufacturer	Realtek Semiconductor
Manufacturer's Part Number	RTL8111F-CG
Description	SERIAL IO/COMMUNICATION CONTROLLER, LAN; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE; Package Body Material: UNSPECIFIED;
Datasheet	RTL8111F-CG Datasheet

NAME	DESCRIPTION
Minimum Supply Voltage:	.95 V
Package Body Material:	UNSPECIFIED
Nominal Supply Voltage:	1 V
Maximum Seated Height:	1 mm
Surface Mount:	YES
Data Encoding or Decoding Method:	BIPH-LEVEL(MANCHESTER)
No. of Terminals:	48
Terminal Position:	QUAD
Package Style (Meter):	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
Maximum Data Transfer Rate:	312.5 MBps
Technology:	CMOS
JESD-30 Code:	S-XQCC-N48
Maximum Clock Frequency:	25 MHz
Package Shape:	SQUARE
Terminal Form:	NO LEAD
Maximum Operating Temperature:	70 Cel
Package Code:	HVQCCN
Width:	6 mm
Peripheral IC Type:	SERIAL IO/COMMUNICATION CONTROLLER, LAN
Maximum Supply Voltage:	1.05 V
Low Power Mode:	YES
Boundary Scan:	NO
Communication Protocol:	SYNC, BYTE
Minimum Operating Temperature:	0 Cel
Package Equivalence Code:	LCC48,.24SQ,16
Length:	6 mm
Bus Compatibility:	SMBUS; SPI
Terminal Pitch:	.4 mm

Popular Products

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;

SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.

BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.

SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;

BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.

LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.