Phoenix Contact - MC1,5/6-ST-3,81

MC1,5/6-ST-3,81 by Phoenix Contact

Image shown is a representation only.

Manufacturer	Phoenix Contact
Manufacturer's Part Number	MC1,5/6-ST-3,81
Description	BARRIER STRIP TERMINAL BLOCK; Mounting Type: CONNECTOR; Fastening Method: SCREW; Additional Features: STANDARD: UL94V-0, POLYAMIDE; Wire Gauge: 16 AWG; Voltage (Rated): 160 V;
Datasheet	MC1,5/6-ST-3,81 Datasheet

MC1,5/6-ST-3,81 Technical Details

NAME	DESCRIPTION
Wire Cross Section:	1.5 mm2
No. of Decks:	1
Current (Rated):	8 A
Fastening Method:	SCREW
Voltage (Rated):	160 V
Additional Features:	STANDARD: UL94V-0, POLYAMIDE
No. of Rows:	1
Mounting Type:	CONNECTOR
Terminal & Terminal Block Type:	BARRIER STRIP TERMINAL BLOCK
No. of Ways:	6
Safety Approval:	CB; CSA; CUL; EAC; UL; VDE
Wire Gauge:	16 AWG

Powered by Partstack

Popular Products

LP2950CDT-3.3G

Onsemi

LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.

BSS138

Yangzhou Yangjie Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;

LL4148

Bkc Semiconductors

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

1N4148

Weitronic Enterprise

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

SS14

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

OPA2227UA

Texas Instruments

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

LL4148

Vishay Intertechnology

Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.

1N4148WT

Continental Device India

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

LM107H

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;

U.FL-R-SMT-1(10)

Hirose Electric

U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.

Category Top Products