Image shown is a representation only.
| Manufacturer | Panasonic |
|---|---|
| Manufacturer's Part Number | TQ2SA-12V |
| Description | POWER/SIGNAL RELAY; Mounting Feature: SURFACE MOUNT-STRAIGHT; Relay Action: MOMENTARY; Relay Function: DPDT; Coil or Input Supply Type: DC; Reference Standard: CSA; UL; |
| Datasheet | TQ2SA-12V Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Nominal Coil Voltage: | 12 V |
| Maximum Contact AC Power Rating (R Load): | 62.5VA@125VAC |
| Maximum DC Contact Current: | 2 A |
| Relay Function: | DPDT |
| DC Coil Release Voltage: | 1.2 V |
| Maximum AC Contact Voltage: | 125 V |
| Dielectric Strength Between Open Contacts: | 1000 Vrms |
| Contact or Output Supply Type: | AC/DC |
| Maximum Contact DC Rating (R Load): | 2A@220VDC |
| Relay Type: | POWER/SIGNAL RELAY |
| No. of Terminals: | 10 |
| Coil or Input Supply Type: | DC |
| Relay Form: | 2 FORM C |
| Termination Type: | SOLDER |
| Operate Time: | 4 ms |
| Electrical Life: | 100000 Cycle(s) |
| DC Coil Operate Voltage: | 9 V |
| Release Time: | 4 ms |
| Maximum Operating Temperature: | 70 Cel |
| Contact Resistance: | 75 mohm |
| Insulation Resistance: | 1000000000 ohm |
| Input Switching Control Type: | Random |
| Maximum DC Coil Current: | .012 A |
| Maximum AC Contact Current: | 2 A |
| End Contact Material: | Silver Nickel |
| Maximum DC Contact Voltage: | 220 V |
| Maximum Contact DC Power Rating (R Load): | 60W@220VDC |
| Packing Method: | TUBE |
| Coil Resistance: | 1028 ohm |
| Minimum Operating Temperature: | -40 Cel |
| Weight: | 2 g |
| Mounting Feature: | SURFACE MOUNT-STRAIGHT |
| Relay Action: | MOMENTARY |
| Body Width: | 9 inch |
| Maximum DC Coil Voltage: | 12 V |
| Dielectric Strength Between Coil & Contacts: | 1500 Vrms |
| End Contact Plating: | GOLD |
| Physical Dimension: | 14mm x 9mm x 5.4mm |
| Body Height: | 5.4 mm |
| Additional Features: | LOW PROFILE |
| Body Length/Diameter: | 14 mm |
| Reference Standard: | CSA; UL |
| Maximum Contact AC Rating (R Load): | 2A@125VAC |
| Coil Power (mW): | 140 |
