IP4853CX24/P by NXP Semiconductors | Vyrian | Semiconductor & Electronic Component Distributor

Image shown is a representation only.

Manufacturer	NXP Semiconductors
Manufacturer's Part Number	IP4853CX24/P
Description	CMOS TO ECL TRANSLATOR; Temperature Grade: OTHER; Terminal Form: BALL; No. of Terminals: 24; Package Code: VFBGA; Package Shape: SQUARE;
Datasheet	IP4853CX24/P Datasheet

NAME	DESCRIPTION
Minimum Supply Voltage:	1.62 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	1.8 V
Maximum Seated Height:	.65 mm
Output Latch/Register:	NONE
Surface Mount:	YES
No. of Terminals:	24
Terminal Position:	BOTTOM
Package Style (Meter):	GRID ARRAY, VERY THIN PROFILE, FINE PITCH
JESD-30 Code:	S-PBGA-B24
Package Shape:	SQUARE
Terminal Form:	BALL
Maximum Operating Temperature:	85 Cel
Package Code:	VFBGA
Interface IC Type:	CMOS TO ECL TRANSLATOR
Width:	1.99 mm
No. of Bits:	4
Output Polarity:	TRUE
Maximum Supply Voltage:	2.1 V
Maximum Delay:	10.1 ns
Minimum Operating Temperature:	-30 Cel
No. of Functions:	1
Qualification:	Not Qualified
Length:	1.99 mm
Additional Features:	IT ALSO NEED 2.7 TO 5 VOLT BATTERY SUPPLY
Terminal Pitch:	.4 mm
Temperature Grade:	OTHER

Popular Products

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;

SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;

LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.

Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;

MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.