CL-SB-22C-01 by Nidec Copal Electronics | Vyrian | Semiconductor & Electronic Component Distributor

Image shown is a representation only.

Manufacturer	Nidec Copal Electronics
Manufacturer's Part Number	CL-SB-22C-01
Description	SLIDE SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: DPDT; Type (Actuator): SLIDE; Switch Action: LATCHED; Body Length/Diameter: 8.5 mm;
Datasheet	CL-SB-22C-01 Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	.2 A
No. of Positions:	2
Center Contact Plating:	SILVER
Center Contact Material:	COPPER ALLOY
Housing Material:	POLYPHENYLENE SULPHIDE
Type (Actuator):	SLIDE
Switch Action:	LATCHED
Terminal Material:	COPPER ALLOY
Termination Type:	SOLDER
Electrical Life:	10000 Cycle(s)
Maximum Operating Temperature:	85 Cel
Material (Actuator):	POLYAMIDE
Contact Resistance:	50 mohm
Insulation Resistance:	100000000 ohm
End Contact Material:	COPPER ALLOY
Maximum DC Contact Voltage:	12 V
DC Maximum Rating R Load (Contact):	.2A@12VDC
Dielectric Withstand Volts (V):	500VAC
PCB Hole Count:	6
Maximum Operating Force:	2.5 N
Packing Method:	BAG; BULK
Switch Type:	SLIDE SWITCH
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	THROUGH HOLE-STRAIGHT
Body Width:	3.5 inch
Switch Function:	DPDT
Contact Timing:	BREAK-BEFORE-MAKE
Terminal Length:	.118 inch
Length (Actuator):	.079 inch
End Contact Plating:	SILVER
Insulator Material:	POLYPHENYLENE SULPHIDE
Body Height:	3.5 mm
Body Length/Diameter:	8.5 mm

Popular Products

BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;

LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.

MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;

The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;