ENC28J60-I/SO by Microchip Technology | Vyrian | Semiconductor & Electronic Component Distributor

Image shown is a representation only.

Manufacturer	Microchip Technology
Manufacturer's Part Number	ENC28J60-I/SO
Description	SERIAL IO/COMMUNICATION CONTROLLER, LAN; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR;
Datasheet	ENC28J60-I/SO Datasheet

NAME	DESCRIPTION
Minimum Supply Voltage:	3.1 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	3.3 V
Maximum Time At Peak Reflow Temperature (s):	40
Maximum Seated Height:	2.65 mm
Sub-Category:	Serial IO/Communication Controllers
Surface Mount:	YES
Maximum Supply Current:	180 mA
Terminal Finish:	Matte Tin (Sn)
On Chip Data RAM Width:	8
No. of Terminals:	28
No. of Serial I/Os:	1
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
Address Bus Width:	0
Screening Level:	TS 16949
Maximum Data Transfer Rate:	1.25 MBps
Technology:	CMOS
RAM Words:	8192
JESD-30 Code:	R-PDSO-G28
Maximum Clock Frequency:	25 MHz
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Maximum Operating Temperature:	85 Cel
Package Code:	SOP
Width:	7.5 mm
Moisture Sensitivity Level (MSL):	1
Peripheral IC Type:	SERIAL IO/COMMUNICATION CONTROLLER, LAN
Maximum Supply Voltage:	3.6 V
Low Power Mode:	YES
Boundary Scan:	NO
External Data Bus Width:	0
Communication Protocol:	SYNC; BIT ;BYTE
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
Qualification:	Not Qualified
Package Equivalence Code:	SOP28,.4
Length:	17.9 mm
Peak Reflow Temperature (C):	250
Bus Compatibility:	SPI
Terminal Pitch:	1.27 mm
Temperature Grade:	INDUSTRIAL
Power Supplies (V):	3.3

Popular Products

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;

LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.

KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.

08055C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.

CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.