1SE1 by Micro Switch | Vyrian | Semiconductor & Electronic Component Distributor

Image shown is a representation only.

Manufacturer	Micro Switch
Manufacturer's Part Number	1SE1
Description	SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SPHERICAL STEEL PLUNGER; Maximum Pre Travel: 1.27 mm; Termination Type: WIRE;
Datasheet	1SE1 Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	5 A
Maximum DC Contact Voltage:	30 V
DC Maximum Rating R Load (Contact):	5A@30VDC
Maximum Operating Force:	4.73 N
Type (Actuator):	SPHERICAL STEEL PLUNGER
Switch Type:	SNAP ACTING/LIMIT SWITCH
Maximum AC Contact Voltage:	250 V
Maximum Pre Travel:	1.27 mm
AC Maximum Rating R Load (Contact):	5A@250VAC
Sealing:	CORROSION PROOF; EPOXY TERMINAL SEALED
Mounting Feature:	PANEL MOUNT
Actuator Travel (mm):	1.35
Body Width:	8.79 inch
Switch Action:	MOMENTARY
Switch Function:	SPDT
Termination Type:	WIRE
Body Height:	15.24 mm
Body Length/Diameter:	22.25 mm
Manufacturer Series:	1SE1
Maximum AC Contact Current:	5 A

Popular Products

2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.

1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.

LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.