UB2-24NU-L by KEMET Corporation | Vyrian | Semiconductor & Electronic Component Distributor

Image shown is a representation only.

Manufacturer	KEMET Corporation
Manufacturer's Part Number	UB2-24NU-L
Description	POWER/SIGNAL RELAY; Mounting Feature: SURFACE MOUNT-STRAIGHT; Relay Action: MOMENTARY; Relay Function: DPDT; Coil or Input Supply Type: DC; Reference Standard: CSA; TUV; UL;
Datasheet	UB2-24NU-L Datasheet

NAME	DESCRIPTION
Nominal Coil Voltage:	24 V
Maximum Contact AC Power Rating (R Load):	37.5VA@250VAC
Maximum DC Contact Current:	1 A
Relay Function:	DPDT
DC Coil Release Voltage:	2.4 V
Maximum AC Contact Voltage:	250 V
Dielectric Strength Between Open Contacts:	1000 Vrms
Contact or Output Supply Type:	AC/DC
Maximum Contact DC Rating (R Load):	1A@220VDC
Relay Type:	POWER/SIGNAL RELAY
No. of Terminals:	8
Coil or Input Supply Type:	DC
Relay Form:	2 FORM C
Termination Type:	SOLDER
Operate Time:	2 ms
Electrical Life:	100000 Cycle(s)
DC Coil Operate Voltage:	18 V
Release Time:	1 ms
Maximum Operating Temperature:	85 Cel
Contact Resistance:	100 mohm
Insulation Resistance:	1000000000 ohm
Input Switching Control Type:	Random
Maximum DC Coil Current:	.01 A
Maximum AC Contact Current:	1 A
End Contact Material:	Silver Alloy
Maximum DC Contact Voltage:	220 V
PCB Hole Count:	8
Maximum Contact DC Power Rating (R Load):	30W@220VDC
Packing Method:	TAPE AND REEL
Coil Resistance:	2504 ohm
Minimum Operating Temperature:	-40 Cel
Weight:	1 g
Mounting Feature:	SURFACE MOUNT-STRAIGHT
Relay Action:	MOMENTARY
Body Width:	5.7 inch
Maximum DC Coil Voltage:	24 V
Dielectric Strength Between Coil & Contacts:	1500 Vrms
End Contact Plating:	GOLD ALLOY
Physical Dimension:	10.6mm x 5.7mm x 8.8mm
Body Height:	8.8 mm
Body Length/Diameter:	10.6 mm
Reference Standard:	CSA; TUV; UL
Maximum Contact AC Rating (R Load):	1A@250VAC
Coil Power (mW):	230

Popular Products

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.

Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;

MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.

ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.

C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;

LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.