![BD02 by ITT Cannon BD02 by ITT Cannon](https://partstack.com/mpn/images/200/2139281803.webp)
Image shown is a representation only.
Manufacturer | ITT Cannon |
---|---|
Manufacturer's Part Number | BD02 |
Description | DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; null: SLIDE; Maximum DC Contact Voltage: 5 V; null: PHOSPHOR BRONZE; null: 2; |
Datasheet | BD02 Datasheet |
NAME | DESCRIPTION |
---|---|
Maximum DC Contact Current: | .1 A |
Center Contact Plating: | SILVER OVER NICKEL |
Center Contact Material: | PHOSPHOR BRONZE |
Housing Material: | POLYBUTYLENE TEREPHTHALATE |
Actuator Length: | .04 inch |
Maximum Contact DC Rating (R Load): | .1A@5VDC |
Solderability: | MIL-STD |
Terminal Finish: | Matte Tin (Sn) - with Nickel (Ni) barrier |
Actuator Angle: | 0 deg |
Dielectric Withstand Volts: | 500VRMS |
Switch Action: | LATCHED |
Terminal Material: | BRONZE |
Termination Type: | SOLDER |
Electrical Life: | 10000 Cycle(s) |
Maximum Operating Temperature: | 85 Cel |
Manufacturer Series: | BD |
Contact Resistance: | 50 mohm |
Insulation Resistance: | 1000000000 ohm |
End Contact Material: | PHOSPHOR BRONZE |
Maximum DC Contact Voltage: | 5 V |
Contact Function: | ON-OFF |
Number of Positions: | 2 |
PCB Hole Count: | 4 |
Actuator Type: | SLIDE |
Packing Method: | TUBE |
Switch Type: | SLIDE DIP SWITCH |
Sealing: | EPOXY TERMINAL SEALED |
JESD-609 Code: | e3 |
Minimum Operating Temperature: | -40 Cel |
Number of Switch Sections: | 2 |
Mounting Feature: | THROUGH HOLE-STRAIGHT |
Body Width: | 9.65 inch |
Switch Function: | SPST |
Terminal Length: | .141 inch |
End Contact Plating: | SILVER OVER NICKEL |
Insulator Material: | POLYBUTYLENE TEREPHTHALATE |
Body Height: | 6.73 mm |
Body Length/Diameter: | 9.65 mm |
Washability: | SOLVENT |
Actuator Material: | GLASS FILLED NYLON |