Honeywell Sensing And Control - 102TL2-6F

102TL2-6F by Honeywell Sensing And Control

Image shown is a representation only.

Manufacturer	Honeywell Sensing And Control
Manufacturer's Part Number	102TL2-6F
Description	TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPDT; Type (Actuator): LOCKING LEVER; DC Maximum Rating R Load (Contact): 7.5A@28VDC; Termination Type: WIRE;
Datasheet	102TL2-6F Datasheet

102TL2-6F Technical Details

NAME	DESCRIPTION
Maximum DC Contact Current:	7.5 A
Maximum DC Contact Voltage:	28 V
DC Maximum Rating R Load (Contact):	7.5A@28VDC
Type (Actuator):	LOCKING LEVER
Switch Type:	TOGGLE SWITCH
Maximum AC Contact Voltage:	125 V
AC Maximum Rating R Load (Contact):	7.5A@125VAC
Sealing:	DUST PROOF; WATER PROOF
Mounting Feature:	PANEL MOUNT-THREADED
Body Width:	22.61 inch
Switch Action:	MOMENTARY
Switch Function:	DPDT
Termination Type:	WIRE
Body Height:	37.34 mm
Body Length/Diameter:	33.53 mm
Maximum Operating Temperature:	71 Cel
Manufacturer Series:	102TL2
Maximum AC Contact Current:	7.5 A

Powered by Partstack

Popular Products

SMBJ18CA

Brightking

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

1N4148

Invensys Sensor Systems

RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;

BSS138LT3G

Onsemi

BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.

LL4148

TDK

RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;

INA826AIDGKR

Texas Instruments

INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.

LP2950CDT-3.3G

Onsemi

LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.

BSS138

Calogic

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;

LL4148

Temic Semiconductors

RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

2N2222A

Vpt Components

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;

LD1117S33TR

STMicroelectronics

LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.

Category Top Products