![219-4MST-P by Cts 219-4MST-P by Cts](https://partstack.com/images/categories/grey/200/1x/dip_switches.webp)
Image shown is a representation only.
Manufacturer | Cts |
---|---|
Manufacturer's Part Number | 219-4MST-P |
Description | DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Additional Features: APPROVAL: UL; Termination Type: SOLDER; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 85 Cel; |
Datasheet | 219-4MST-P Datasheet |
NAME | DESCRIPTION |
---|---|
Maximum DC Contact Current: | .1 A |
Center Contact Plating: | GOLD |
Center Contact Material: | BERYLLIUM COPPER |
Housing Material: | POLYETHYLENE |
Actuator Length: | .01 inch |
Maximum Contact DC Rating (R Load): | 0.1A@20VDC |
Solderability: | WAVE |
Dielectric Withstand Volts: | 500VAC |
Switch Action: | LATCHED |
Termination Type: | SOLDER |
Electrical Life: | 2000 Cycle(s) |
Maximum Operating Temperature: | 85 Cel |
Contact Resistance: | 25 mohm |
Insulation Resistance: | 1000000000 ohm |
End Contact Material: | BERYLLIUM COPPER |
Maximum DC Contact Voltage: | 20 V |
Contact Function: | ON-OFF |
Actuator Type: | MEDIUM |
Packing Method: | TUBE |
Switch Type: | SLIDE DIP SWITCH |
Sealing: | BOTTOM SEALED; TOP TAPE SEALED |
Minimum Operating Temperature: | -55 Cel |
Number of Switch Sections: | 4 |
Mounting Feature: | SURFACE MOUNT-STRAIGHT |
Body Width: | 6.7 inch |
Switch Function: | SPST |
End Contact Plating: | GOLD |
Insulator Material: | POLYETHYLENE |
Body Height: | 4.05 mm |
Additional Features: | APPROVAL: UL |
Body Length/Diameter: | 11.63 mm |
Actuator Material: | POLYETHYLENE |