172 by Carlingswitch | Vyrian | Semiconductor & Electronic Component Distributor

Image shown is a representation only.

Manufacturer	Carlingswitch
Manufacturer's Part Number	172
Description	PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPST; Type (Actuator): PLUNGER; Contact Function: OFF-(ON); Finish (Actuator): NICKEL;
Datasheet	172 Datasheet

NAME	DESCRIPTION
Type (Bushing):	15/32-32
Length (Bushing):	.562 inch
Type (Actuator):	PLUNGER
Maximum AC Contact Voltage:	125 V
Finish (Actuator):	NICKEL
Switch Action:	MOMENTARY
Termination Type:	SCREW
Electrical Life:	25000 Cycle(s)
Maximum Operating Temperature:	85 Cel
Manufacturer Series:	172
Material (Actuator):	BRASS
Insulation Resistance:	100000000 ohm
Maximum AC Contact Current:	15 A
Angle (Actuator):	0 deg
Dielectric Withstand Volts (V):	1000VAC
Contact Function:	OFF-(ON)
Maximum Operating Force:	11.12 N
Switch Type:	PUSHBUTTON SWITCH
AC Maximum Rating R Load (Contact):	15A@125VAC
Minimum Operating Temperature:	0 Cel
Mounting Feature:	PANEL MOUNT-THREADED
Body Width:	14.63 inch
Switch Function:	SPST
Contact Timing:	SLOW-MAKE/-BREAK
Length (Actuator):	.32 inch
Insulator Material:	PHENOLIC
Body Height:	15.34 mm
Body Length/Diameter:	35.1 mm

Popular Products

2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.

LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.

Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.

1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.

FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .0625 W; Maximum Operating Temperature: 155 Cel; Tolerance: 1 %;

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;