KMS223GPLFG by C & K Components | Vyrian | Semiconductor & Electronic Component Distributor

Image shown is a representation only.

Manufacturer	C & K Components
Manufacturer's Part Number	KMS223GPLFG
Description	KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-RIGHT ANGLE; Switch Function: SPST; Type (Actuator): STANDARD TYPE; Solderability: REFLOW; Maximum DC Contact Current: .01 A;
Datasheet	KMS223GPLFG Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	.01 A
Maximum Contact Bounce Time:	3 ms
Center Contact Material:	GOLD
Type (Actuator):	STANDARD TYPE
Solderability:	REFLOW
Terminal Finish:	GOLD
Actuator Travel (mm):	0.25
Switch Action:	MOMENTARY-TACTILE
Termination Type:	SOLDER
Electrical Life:	100000 Cycle(s)
Maximum Operating Temperature:	125 Cel
Contact Resistance:	100 mohm
Insulation Resistance:	1000000000 ohm
End Contact Material:	GOLD
Maximum DC Contact Voltage:	32 V
DC Maximum Rating R Load (Contact):	.01A@32VDC
Dielectric Withstand Volts (V):	250VDC
Maximum Operating Force:	2.5 N
DC Maximum Power Rating R Load (Contact):	0.2VA@32VDC
Packing Method:	TR, 13 INCH
Switch Type:	KEYPAD SWITCH
Sealing:	IP40
JESD-609 Code:	e4
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	SURFACE MOUNT-RIGHT ANGLE
Body Width:	2.8 inch
Switch Function:	SPST
Circuit Config:	1X1
Body Height:	1.42 mm
Additional Features:	ROHS COMPLIANT, WITH PEGS
Body Length/Diameter:	4.2 mm
No. of Switches:	1

Popular Products

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;

MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;

FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.

Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;

CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;