C & K Components - EP11SD1AVBE

EP11SD1AVBE by C & K Components

Image shown is a representation only.

Manufacturer C & K Components
Manufacturer's Part Number EP11SD1AVBE
Description PUSHBUTTON SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPST; Type (Actuator): PLUNGER; Solderability: MIL-STD; AC Maximum Power Rating R Load (Contact): 0.4VA@20VAC;
Datasheet EP11SD1AVBE Datasheet
NAME DESCRIPTION
Maximum DC Contact Current: .02 A
Center Contact Plating: GOLD OVER NICKEL
Center Contact Material: COPPER ALLOY
Length (Bushing): .177 inch
Housing Material: GLASS FILLED NYLON
Type (Actuator): PLUNGER
Maximum AC Contact Voltage: 20 V
Solderability: MIL-STD
Terminal Finish: GOLD
Switch Action: MOMENTARY
Terminal Material: COPPER ALLOY
Termination Type: SOLDER
Electrical Life: 60000 Cycle(s)
Maximum Operating Temperature: 85 Cel
Contact Resistance: 20 mohm
Insulation Resistance: 1000000000 ohm
Maximum AC Contact Current: .02 A
End Contact Material: COPPER ALLOY
Maximum DC Contact Voltage: 20 V
DC Maximum Rating R Load (Contact): .02A@20VDC
Dielectric Withstand Volts (V): 1000VRMS
Switch Type: PUSHBUTTON SWITCH
AC Maximum Rating R Load (Contact): .02A@20VAC
Sealing: EPOXY TERMINAL SEALED
JESD-609 Code: e4
Minimum Operating Temperature: -30 Cel
Mounting Feature: THROUGH HOLE-RIGHT ANGLE
Body Width: 6.22 inch
Switch Function: SPST
Length (Actuator): .215 inch
End Contact Plating: GOLD OVER NICKEL
Insulator Material: GLASS FILLED NYLON
Body Height: 14.35 mm
Body Length/Diameter: 8.13 mm
AC Maximum Power Rating R Load (Contact): 0.4VA@20VAC
Plant 5!
Your quote plants 5 trees.

Popular Products

Category Top Products