TP42W008000 by Apem Components | Vyrian | Semiconductor & Electronic Component Distributor

Image shown is a representation only.

Manufacturer	Apem Components
Manufacturer's Part Number	TP42W008000
Description	PUSHBUTTON SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: DPDT; Type (Actuator): STANDARD PLUNGER; Contact Function: ON-(ON); Solderability: WAVE;
Datasheet	TP42W008000 Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	.02 A
Center Contact Plating:	GOLD
Center Contact Material:	BRASS
Length (Bushing):	.225 inch
Type (Actuator):	STANDARD PLUNGER
Maximum AC Contact Voltage:	20 V
Solderability:	WAVE
Terminal Finish:	Gold (Au)
Actuator Travel (mm):	.9906
Switch Action:	MOMENTARY
Terminal Material:	BRASS
Termination Type:	SOLDER
Electrical Life:	60000 Cycle(s)
Maximum Operating Temperature:	85 Cel
Manufacturer Series:	TP
Material (Actuator):	GLASS FILLED POLYAMIDE
Contact Resistance:	50 mohm
Insulation Resistance:	1000000000 ohm
Maximum AC Contact Current:	.02 A
End Contact Material:	BRASS
Maximum DC Contact Voltage:	20 V
DC Maximum Rating R Load (Contact):	.02A@20VDC
Contact Function:	ON-(ON)
PCB Hole Count:	8
Packing Method:	BULK
Switch Type:	PUSHBUTTON SWITCH
AC Maximum Rating R Load (Contact):	.02A@20VAC
Sealing:	EPOXY TERMINAL SEALED
JESD-609 Code:	e4
Minimum Operating Temperature:	-30 Cel
Mounting Feature:	THROUGH HOLE-RIGHT ANGLE
Body Width:	8.1 inch
Switch Function:	DPDT
Terminal Length:	.129 inch
Length (Actuator):	.139 inch
End Contact Plating:	GOLD
Insulator Material:	POLYBUTYLENE TEREPHTHALATE
Body Height:	9.6 mm
Body Length/Diameter:	8.58 mm
Washability:	SOLVENT
Diameter (Bushing):	.196 inch
AC Maximum Power Rating R Load (Contact):	0.4VA@20VAC

Popular Products

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;

RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;

CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;

FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.

SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.

LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.