Image shown is a representation only.
| Manufacturer | Apem Components |
|---|---|
| Manufacturer's Part Number | 13445-4X778 |
| Description | PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPDT; Type (Actuator): PLUNGER; Contact Function: (ON)-OFF; Contact Resistance: 10 mohm; |
| Datasheet | 13445-4X778 Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Maximum DC Contact Current: | 4 A |
| Center Contact Plating: | GOLD OVER NICKEL |
| Center Contact Material: | SILVER |
| Type (Bushing): | 15/32-32 |
| Length (Bushing): | .295 inch |
| Housing Material: | POLYBUTYLENE TEREPHTHALATE |
| Type (Actuator): | PLUNGER |
| Maximum AC Contact Voltage: | 125 V |
| Terminal Finish: | Gold (Au) - with Nickel (Ni) barrier |
| Actuator Travel (mm): | 2.0066 |
| Switch Action: | MOMENTARY |
| Termination Type: | SOLDER |
| Electrical Life: | 10000 Cycle(s) |
| Maximum Operating Temperature: | 85 Cel |
| Manufacturer Series: | 13000X778 |
| Material (Actuator): | BRASS |
| Contact Resistance: | 10 mohm |
| Insulation Resistance: | 1000000000 ohm |
| Maximum AC Contact Current: | 4 A |
| End Contact Material: | SILVER |
| Angle (Actuator): | 0 deg |
| Maximum DC Contact Voltage: | 28 V |
| DC Maximum Rating R Load (Contact): | 4A@28VDC |
| Dielectric Withstand Volts (V): | 2000VRMS |
| Contact Function: | (ON)-OFF |
| Packing Method: | BULK |
| Switch Type: | PUSHBUTTON SWITCH |
| AC Maximum Rating R Load (Contact): | 4A@125VAC |
| Sealing: | EPOXY TERMINAL SEALED; IP67; SPLASH PROOF |
| JESD-609 Code: | e4 |
| Minimum Operating Temperature: | -40 Cel |
| Mounting Feature: | PANEL MOUNT-THREADED |
| Body Width: | 16 inch |
| Switch Function: | DPDT |
| Terminal Length: | .161 inch |
| Length (Actuator): | .157 inch |
| End Contact Plating: | GOLD OVER NICKEL |
| Insulator Material: | DIALLYL PHTHALATE |
| Body Height: | 15.1 mm |
| Body Length/Diameter: | 16 mm |
| Diameter (Bushing): | .469 inch |
