LT1175MJ8 by Analog Devices | Vyrian | Semiconductor & Electronic Component Distributor

Image shown is a representation only.

Manufacturer	Analog Devices
Manufacturer's Part Number	LT1175MJ8
Description	ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: DIP; Terminal Form: THROUGH-HOLE; Minimum Operating Temperature: -55 Cel; JESD-30 Code: R-CDIP-T8;
Datasheet	LT1175MJ8 Datasheet

NAME	DESCRIPTION
Package Body Material:	CERAMIC
Minimum Input-Output Voltage Differential:	1 V
Surface Mount:	NO
Regulator Type:	ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR
Terminal Finish:	Tin/Lead (Sn/Pb)
No. of Outputs:	1
Maximum Output Current-1:	.5 A
No. of Terminals:	8
Terminal Position:	DUAL
Package Style (Meter):	IN-LINE
Technology:	BIPOLAR
JESD-30 Code:	R-CDIP-T8
Package Shape:	RECTANGULAR
Terminal Form:	THROUGH-HOLE
Maximum Operating Temperature:	125 Cel
Operating Temperature (TJ-Max):	150 Cel
Package Code:	DIP
Qualification Status:	Not Qualified
Maximum Dropout Voltage-1:	.7 V
Maximum Load Regulation (%):	.25 %
JESD-609 Code:	e0
Minimum Operating Temperature:	-55 Cel
No. of Functions:	1
Package Equivalence Code:	DIP8,.3
Nominal Dropout Voltage-1:	.5 V
Maximum Line Regulation (%/V):	.015
Operating Temperature (TJ-Min):	-55 Cel
Adjustability:	ADJUSTABLE
Maximum Input-Output Voltage Differential:	25 V

Popular Products

FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.

ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.

MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;

PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;

MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.